COMPLETE PREFABRICATED SOLUTION

A unique “Modular Self-sufficient Technological Combination”, that targets to construct a “Complete Prefabricated Solution” after floor tiles and general networks are finalized, by dividing, covering and equipping “High Traffic Sanitary Areas & Changing Facilities”, with self-standing or wall-mounted units, equipped with “out of walls” hydraulic, sewage, electric and ventilation networks that are adjusted on the systems, based on the idea of “economy”, “applying simplicity”, and “sufficiency”, but without neglecting the standard characteristics of the “handcrafted technological fabrication”, “quality”, “long life duration”, “mobility”, “inspection ability”, “hygiene” and that of “one source producer-provider”.

ADVANTAGES

Projecting Architects
  • Leading solution
  • Technologically advanced
  • Projecting flexibility
  • Improved programming
  • Improved cost control
  • Improved sustainability
  • One producer-provider
  • Prefabricated
  • Controlled production environment
  • Guaranteed quality
  • Finishing perfection
  • Hygiene conscious
Construction Companies
  • Time economical
  • Utilization of off-site skills
  • Reliance reduction on skilled labor
  • Up to 60% faster installations
  • Reliance reduction of on-site accidents
Investors & End Users
  • Improved infection control
  • Easy to clean
  • Long life solution-Durable
  • Anti vandal ability
  • Easy to maintain and preserve
  • 100% return of investment value

Soema paid the outmost “Attention to Flexibility”, so that when needed, one can “Cut and Sow” on the spot “Demolishing Perfection Problems” that occur due to non calculated obstacles and mistakes.
At the same time, the perfectly prepared “Modular System” and the drafted “Installations Manual” does not allow miscalculated errors in the inspectional installation process and contributes sufficiently to the “Perfection of the Project”.
Due to “Prefabrication”, SPIS. is efficient and specific when installed “Preventing Man Errors, Loss in Time and Money”.

Time economy
SPIS. is a solution that can eliminate practically time shortages. The fact that the whole system is “Modular and Prefabricated” ensures an “Earlier Start of Preparations” and a greater “Predictability of Programming” which gives the possibility to install on site easier, faster and with the ability to adjust.
This can bring an astonishing result of up to 60% time economy in finalizing any project.

Economy of works, material and sustainability improvement When applying SPIS. the preliminary and finishing works calculated in a classical solution are not needed contributing highly to waste, works and material reduction.

At the same time by “Transferring Preparation Work” to a “Controlled Off-Site Production” strengthens the safety issues “Minimizing the Accident Possibility Ratio” and the “Impact of Construction Activities” on-site, including “Noise” and “Vehicle Movements”, thus upgrading working levels.

“Long Life Insurance” of any product is the latitude possibility it has to be “Serviceable”.

This important element is achieved only if the product or system is designed with that philosophy. Maintaining sanitary equipment, accessories and networks after implementing SPIS can be “Easy and Effortless”. The systems of Soema “Guarantee” at all times “Economy”, “Affordable Spare Parts”, “Swiftness” and “Access to Essential Areas”, thus upgrading “Ease for Routine Maintenance Ability”.

The equipment used for any professional purposes must not only have the ability of long life functioning insurance, but also the possibility to “reduce theft”, “restore graffiti attacks” and hard usage.

In SPIS. all the equipment, finishing material and accessories used are designed and produced with the exact philosophy of “anti vandal ability” minimizing (as much as possible) such situations that cost discomfort, time and money.

The dividing finishing walls and surfaces of SPIS. are created from “Hygiene Material” with “Manufacturing Precision” in compliance with stringent healthcare regulations.
All the “Accessories are Inserted” in the core of the panels used to create “Easy Cleanable Flat Effect Surfaces”.
Upgraded constantly with the widely recognized “No Touch” electronic sanitary equipment and fixtures produced by Soema, the systems are “Hygiene Conscious” minimizing essentially the possibilities of “Cross-Contamination” in such areas.
In this manner SPIS. “Improve Infection Control” more than any classical solution today and at the same time “Reduce Effectively the Costs” of manpower and cleaning material needed.

MO.PPS: A flexible“Modular Prefabricated Perimeter System” composed of “Self-bearing” 82mm “Thermo-acoustic Partition Sandwich Panels” with finishing of “Compact High Pressure Laminate” (C-HPL) surfaces that can be easily assembled on the spot.
The system is unique to separate and divide “Fast Traffic Sanitary Areas and Changing Facilities” avoiding adequately classical masonry works.
Soema has designed and created MO.PPS to finalize spherically the SPIS. family, targeting a complete prefabricated solution for perimeter space forming, dividing and equipping “Vast Sanitary Areas and Changing Facilities”, based on the same ideas of time economy, simplicity, sufficiency, long life, mobility, hygiene and that of one producer-provider.

The system has all the “Basic Characteristics of the SPIS. Family” and can also bear full sanitary, hydraulic and electrical equipment attached with out-of-walls application and with the extra ability to create easily floor to ceiling finished “Sound-effective Modular Perimeter Wall Dividers” or “Sound-effective Modular Room Space Dividers and Corridors” substituting the brick, cement or gypsum wall masonry.

Except the special advantages SPIS. family provides MO.PPS is delivered with the finished effect chosen and no secondary works (plaster, tiles, paint) are needed after their installation. The modular system allows the relocation or rearrangement of a space without difficulty or dust production and has the ability to adopt the strong“Compact High Pressure Laminate” (C-HPL) doors at any perimeter point designed.

Prefabricating with MO.PPS is time economical and energetic since the vast amount of finishing decors provided does not demolish the ability to create a complete product with imagination and color.

Soema paid the outmost “Attention to Flexibility”, so that when needed, one can “Cut and Sow” on the spot “Demolishing Perfection Problems” that occur due to non calculated obstacles and mistakes.
At the same time, the perfectly prepared “Modular System” and the drafted “Installations Manual” does not allow miscalculated errors in the inspectional installation process and contributes sufficiently to the “Perfection of the Project”.
Due to “Prefabrication”, SPIS. is efficient and specific when installed “Preventing Man Errors, Loss in Time and Money”.

Time economy
SPIS. is a solution that can eliminate practically time shortages. The fact that the whole system is “Modular and Prefabricated” ensures an “Earlier Start of Preparations” and a greater “Predictability of Programming” which gives the possibility to install on site easier, faster and with the ability to adjust.
This can bring an astonishing result of up to 60% time economy in finalizing any project.

Economy of works, material and sustainability improvement When applying SPIS. the preliminary and finishing works calculated in a classical solution are not needed contributing highly to waste, works and material reduction.

At the same time by “Transferring Preparation Work” to a “Controlled Off-Site Production” strengthens the safety issues “Minimizing the Accident Possibility Ratio” and the “Impact of Construction Activities” on-site, including “Noise” and “Vehicle Movements”, thus upgrading working levels.

“Long Life Insurance” of any product is the latitude possibility it has to be “Serviceable”.

This important element is achieved only if the product or system is designed with that philosophy. Maintaining sanitary equipment, accessories and networks after implementing SPIS can be “Easy and Effortless”. The systems of Soema “Guarantee” at all times “Economy”, “Affordable Spare Parts”, “Swiftness” and “Access to Essential Areas”, thus upgrading “Ease for Routine Maintenance Ability”.

The equipment used for any professional purposes must not only have the ability of long life functioning insurance, but also the possibility to “reduce theft”, “restore graffiti attacks” and hard usage.

In SPIS. all the equipment, finishing material and accessories used are designed and produced with the exact philosophy of “anti vandal ability” minimizing (as much as possible) such situations that cost discomfort, time and money.

The dividing finishing walls and surfaces of SPIS. are created from “Hygiene Material” with “Manufacturing Precision” in compliance with stringent healthcare regulations.
All the “Accessories are Inserted” in the core of the panels used to create “Easy Cleanable Flat Effect Surfaces”.
Upgraded constantly with the widely recognized “No Touch” electronic sanitary equipment and fixtures produced by Soema, the systems are “Hygiene Conscious” minimizing essentially the possibilities of “Cross-Contamination” in such areas.
In this manner SPIS. “Improve Infection Control” more than any classical solution today and at the same time “Reduce Effectively the Costs” of manpower and cleaning material needed.

MO.PPS: A flexible“Modular Prefabricated Perimeter System” composed of “Self-bearing” 82mm “Thermo-acoustic Partition Sandwich Panels” with finishing of “Compact High Pressure Laminate” (C-HPL) surfaces that can be easily assembled on the spot.
The system is unique to separate and divide “Fast Traffic Sanitary Areas and Changing Facilities” avoiding adequately classical masonry works.
Soema has designed and created MO.PPS to finalize spherically the SPIS. family, targeting a complete prefabricated solution for perimeter space forming, dividing and equipping “Vast Sanitary Areas and Changing Facilities”, based on the same ideas of time economy, simplicity, sufficiency, long life, mobility, hygiene and that of one producer-provider.

The system has all the “Basic Characteristics of the SPIS. Family” and can also bear full sanitary, hydraulic and electrical equipment attached with out-of-walls application and with the extra ability to create easily floor to ceiling finished “Sound-effective Modular Perimeter Wall Dividers” or “Sound-effective Modular Room Space Dividers and Corridors” substituting the brick, cement or gypsum wall masonry.

Except the special advantages SPIS. family provides MO.PPS is delivered with the finished effect chosen and no secondary works (plaster, tiles, paint) are needed after their installation. The modular system allows the relocation or rearrangement of a space without difficulty or dust production and has the ability to adopt the strong“Compact High Pressure Laminate” (C-HPL) doors at any perimeter point designed.

Prefabricating with MO.PPS is time economical and energetic since the vast amount of finishing decors provided does not demolish the ability to create a complete product with imagination and color.